Local Family Owned Utah business.

MasterTech

GASOLINE FUEL INJECTOR SERVICE

801-485-1212

1717 SOUTH STATE STREET SALT LAKE CITY UT 84115 us

If your Injector does not meet specifications we are able to supply you with a new or used fuel injector that is precisely matched to your existing injector.

We also sell Injector Parts separately!

-Injector wiring pigtails      

 -Grommets
-Spacers          

-Pintle caps

-O-rings            

-Injector lock clips


Side Feed Injectors, Hose End Injectors, Top Feed Injectors, GM/Chevrolet spider Injectors

  • Our Fuel Injector Service first begins with an exterior cleaning of each injector.
    • A number is assigned and etched to each Injector.
    • Filter screens are removed (as applicable) and inspected for contamination.
  • Next, resistance readings of injectors is obtained and compared to manufacturer specifications.
  • Baseline readings from injectors are then obtained.
    • ​Fuel flow rate
    • Spray pattern analysis
  • Following readings, each Injector is then ultrasonically cleaned.
    • ​Minimum of 4 cycles of ultrasonic cleaning in a specially designed cleaning solution
    • Followed by a minimum of 2 cycles of pulse modulated cleaning.
  • Next, post cleaning readings of flow rate and spray pattern analysis are recorded. These results are then compared to the manufacturer specifications. If results are not within specification, further cleaning is performed.
  • Once the Injector meets manufacturer specifications, new filter screens (as applicable) and new o-rings (as available) are installed on each injector.
  • Injectors are then bagged, with a data sheet showing before and after results of each injector.
  • ​Your Injectors are now ready to be placed back into service!

What is included in each Injector Service

$20 PER INJECTOR FOR COMPLETE CLEANING AND TESTING

Here at MasterTech automotive, we have been cleaning and flow testing injectors for over 25 years. We have recently expanded our operation to better suit the overwhelming demands of fuel injector cleaning and testing.

Our expansion has included 3 fuel injector test benches, 4 ultrasonic cleaners, and a multitude of adapters that gives us the ability to test and clean 90% of gasoline fuel injectors in use today. We also can test and clean CNG/Natural Gas Injectors.